- Home
- ยป
- Our Products
- »
- Membrane Filters Press
Membrane Filters Press
Membrane Automatic Filter Press
Minimum Order Quantity: 1 Unit
Automation Grade | Automatic |
Filter Area (square meter) | <100, 100-200, 200-300, 300-400, 400-500 |
Filtration Capacity | 1-500 litres/hr, 500-1000 litres/hr, 1000-2000 litres/hr, 2000-3000 litres/hr, >3000 litres/hr |
No Of Plates | 10-20, 20-30, 30-40, 40-50, >50 |
Max Pressure (Mpa) | 16 |
Membrane Automatic Filter press
Membrane Automatic Filter press consists of Pullback cylinder, power pack, PLC, Plate Shifter, Pneumatic valves Mix pack membrane plates. The whole process is fully automatic.
Increased Cake Dry Solids
Membrane Filter Presses improve cake washing by initiating a low-pressure pre-squeeze before the wash cycle is begun. This pre-squeeze eliminates channeling (cracks and less well-formed areas of the cake) and produces a uniform, homogeneous filter cake and optimum wash efficiency.
By applying a high-pressure squeeze to the filter cake you produce the final cake with solids content from 50 to 100% greater than can be achieved with conventional filter presses. This is important for either maximum yield, where a high-value liquid is your product, or high solids-content, where reduced moisture in the final cake is critical.
The membrane squeeze plate is offered to suit up to 16 bars squeezing pressure. Due to additional liquid extraction during the squeeze cycle, solid percentages increase. Filtration cycle time is reduced compared to the conventional recess chamber plate (Plate and frame) filter press, resulting in Benefits of membrane plates v/s chamber plates. Conventional type filter presses are limited to using feed pump discharge pressure to produce dry solids, resulting in longer cycle times.
The membrane squeeze plate reduced the long packing cycle by introducing a squeeze medium into the center of the membrane squeeze plate. This allows the membranes to flex against the cake, compressing and packing it. Filtration cycle is shorter, dry solids are increased, and waste volume is reduced.
This membrane is designed to de water the most difficult sludge and protects the plates against potential cake fewer chambers.
Standard Size of Filter Press:
- 630 MM X 630 MM
- 800 MM X 800 MM
- 1000 MM X 1000 MM
- 1200 MM X 1200 MM
- 1500 MM X 1500 MM
- 1500 MM X 2000 MM
- 2000 MM X 2000 MM
- Type of feeding: Center/ Corner
- Type of structure: Motorized Hydraulic/Motorized Hydraulic with Pullback Cylinder/ Semi Automatic/ Automatic.
- Design Feed pressure: 4 to 20 Bar.
Additional Information:
- Delivery Time: 8-10 weeks
Automatic Membrane Filter Press
Minimum Order Quantity: 1 Piece
Automation Grade | Automatic |
No Of Plates | 30-40, 10-20, 20-30, 40-50 |
Max Pressure (Mpa) | 16 |
Filter Area | 400-500 m2, 200-300 m2, 300-400 m2, 100-200 m2, <100 m2 |
Filtration Capacity | 1000-2000 litres/hr, 2000-3000 litres/hr, >3000 litres/hr, 500-1000 litres/hr, 1-500 litres/hr |
Specifications:
- Standard Size of Filter Press:630 MM X 630 MM,800 MM X 800 MM,1000 MM X 1000 MM,1200 MM X 1200 MM,1500 MM X 1500 MM,1500 MM X 2000 MM,2000 MM X 2000 MM
- Type of feeding: Center/ Corner
- Type of structure: Motorized Hydraulic/Motorized Hydraulic with Pullback Cylinder/ Semi Automatic/ Automatic.
- Design Feed pressure: 4 to 20 Bar.
Additional Information:
- Delivery Time: 8-10 weeks